|
The
Villain cases are actually plastic banks available at "the
Container Store." Each of these banks has been turned
upside down, and the former white top has been painted black.
Clear acetate (in this case, clear presentation covers from
an office supply store) was used to "hang" the costumes.
Each case was measured from the inside, then the appropriately
sized piece of acetate was cut. In all cases, an eighth of
an inch was allowed at the top, to be scored, folded and ultimately
glued to the top of the interior of each case. A "tab"
was also left at the bottom of the acetate, to fit into what
used to be the coin slot of the bank "top."
Each character's
costume was printed and cut with an X-acto blade. Spray adhesive
was applied to the back, then the cut out was applied to the
already cut acetate. Having already scored and folded the
top 1/8", standard model glue was applied to the top
of the acetate. (DO NOT use Super Glue! It creates a chemical
reaction that will "cloud" your acetate.) Using
a pen or similar narrow instrument, firmly apply the glue-bearing
top of the acetate to the top of the case. (This is easiest
when all the parts in question are upside-down.)
Casimir
Summer 2004 |
|
Each
Memorial is now offered as a free download for your use. Feel
free to use each one to build a better Batcave! Each has been
appropriately sized at 300 dpi to fit inside the cases as
described above. Right click and use "Save Target As"
on the link below, then open and print from an appropriate
imaging program. If you try to print these directly from your
browser, they will be far too large. You have been warned!
Note: By downloading and using these, you agree each will
be used only for personal use, and not reselling.
Catwoman
Memorial
Firefly
Memorial
Harley
Quinn Memorial
Mad
Hatter Memorial
Riddler
Memorial
Scarface
Memorial
Difficulty:  (Assembly
using download) |
